|
|
PE-AL-PE COMPOSITE PIPE
XINFENG
brand PE-AL-PE Composite Pipe is a new penetration of pipe engineering
and a great reformation of pipe manufacture. It has many sharp
chemical and physical properties, with which it enjoys advantages
of both metal pipe and plastic pipe, thus has been widely used
in cold and hot water, gas, compressed air, solar energy and air-conditioned,
heating, medical, foodstuff and chemical fluid supply pipe systems,
of both industrial and household. It's the best substitute for
all-plastic pipe, copper pipe and Galvanized pipe.
With complying with ASTM standards of USA in its manufacture and
productions, tested by national authorities, XINFENG
pipe's quality meets completely that of USA and European Similar
products.
|
|
|
QUALITY STANDARDS
ISO9002 Quality System Certified
ASTM F1281/F1282 Standards of USA
|
|
FEATURES
Structure
XINFENG pipe's inner and outside layers are of special
PE, Hygienic, toxic-free and smooth, Its middle layer of AL is
able to refuse 100% of gas permeability, give it both advantages
of metal and plastic pipe, but eliminate their own disadvantages.
|
|
|
1. cross-linked polyethylene
2. adhesive for PE and AL
3. longitudinally, overlapped welded aluminium pipe
4. adhesive for PE and AL
5. cross-linked polyethylene |
Characters & Advantages
Wide
range working temp, Hi-pressure resistance
More 30% flow than metal pipe
50-year working life
Non-corrosive, scale-free
Hygiene, no oxygen permeability, no growth of microorganism
Non-inflammable, non-static
Easy bending but never spring back
Light in weight, easy to carry and store
Few pipe fitting applying leading to few leakage
Easy to install, wide range of usage
Mechanical Parameter
Thermal Conductivity: 0.45 W/m.K
Thermal Expansibility: 2.5*10-5 m/m.K
Bending Radius: >=5D (D=Outer Diameter)
Working Temperature: -40°C
~+95°C
Working Pressure: 1.0 MPa
|
|
APPLICATIONS
Cool & Hot Water Pipe System
Its smooth inside appearance, rust-free and scalefree leading
to a more 30% flow of XINFENG pipe than metal
pipe. East bending, installed directly on girder, buried inside
wall and cement concrete, XINFENG pipe can be
found with a simple metal detector, it's very suitable for cold
and hot water system of both household and industry.
|
|
|
Housing Gas
Pipe System
The continually-welded middle layer of AL-Pipe makes XINFENG
pipe able to stand Hi-working Pressure and no gas(oxygen) permeability,
it's long enough to decrease fitting attached, thus no leakage.
XINFENG pipe, used in compressed air, gas, oxygen
etc. supply line is assured safe.
|
|
|
Underfloor Heading System
Hard but able to bend. not accessible to deform because of pressure,
even deformed, not split never spring back and long enough, it
decreased fitting applying to avoid flow resistance and leakage,
it enjoys a wide range of working temperature (-40°C
~ +95°C). Underfloor heating is a hygiene and Hi-class heating system,
which has been widely used in world.
Few pipe meets the technical requirements of underfloor heating
system, but XINFENG pipe can do it!
|
|
|
Solar Energy & Air-conditioning
Matching Pipe System
Not accessible to frost and Hi-thermal preservation can save the
cost of thermal-preservation, thus give these systems hi-efficiency
working.
|
|
|
Medical, Foodstuff
& Chemical Industry Pipe System
XINFENG pipe's inside and outside PE doesn't
react chemically, and it's no leakage, hygiene and safe. As medical
and oxygen supply pipe, it can be assured safe and the purity
of its carrying media. As foodstuff industrial fluid supply pipe,
it's corrosion-resistant. contamination-resistant to assure foodstuff
not to be contaminated during manufacture. Below 60°C,
PE is able to stand all kind of (in density) acid and alkali solutions,
static-tree, thus it can be just used in chemical industry but
needless to extra protection.
|
|
SPECIFICATIONS
| Description |
Inner
Dia. |
Outer
Dia. |
Unit Weight |
Packing |
| 1216 |
12mm |
16mm |
0.102kg/m |
200m in coil |
| 1418 |
14mm |
18mm |
0.140kg/m |
150m in coil |
| 1620 |
16mm |
20mm |
0.162kg/m |
100m in coil |
| 2025 |
20mm |
25mm |
0.202kg/m |
75m in coil |
| 2632 |
26mm |
32mm |
0.313kg/m |
75m in coil |
| 3240 |
32mm |
40mm |
0.478kg/m |
50m in coil |
| 4050 |
40mm |
50mm |
0.730kg/m |
6m in bar |
| 5163 |
51mm |
63mm |
1.210kg/m |
6m in bar |
|
|
INSTALLATION |

Cut the pipe right angled into length with the ratchet
pipe cutter
|

Rounding the cut end with a calibrating
tool
|

Nut and pressure casing are pushed onto the pipe
end
|

Tightening nut
|

Bending but never spring back
|

Connection scheme
|

Fitting tools
|

Fitting joints
|
|
|
|