L SERIES SLIDING GATE OPERATOR
The L series sliding gate operators are used to drive sliding
gates for residential and industrial uses. The operators
can be fitted with gear wheel or chain wheel according to your
needs, and featured with powerful starting strength, capable of
overwork at short time. In case of power failure, an emergency
release key allows operate gate manually.
|
|
Sliding gate
|
Extension
sliding gate
|
|
|
Advanced Features
Gear-drive or chain-drive is optional
Magnetic or spring limit switch is optional
Self-locking electromechanical gear motor keeps complete close
Motor torque adjustment
Stop on closing if it hits obstruction
Overheat & Overload dual protection
Emergency release key in case of power failure
Wiring terminals for alarm lamp, remote controller,
photocells, loop detector and IC card, etc.
Available in DC24V version, which can be operated by two storage
batteries DC12V each.
|
|
L200/K750 |
L200B |
Control Box |
L110
|
L110A
|
|
|
|
Technical Specifications |
Model |
L200 series |
L110 series |
K750 |
Power supply |
220-240V, 50/60Hz |
110-120V, 60Hz |
380V, 50Hz |
Motor speed |
1250rpm |
1500rpm |
2500rpm |
Motor power |
400W |
400W |
525W |
Output torque |
18N.m |
18N.m |
23N.m |
Max. gate weight |
800kg |
800kg |
1500kg |
Opening speed |
12m/min |
12m/min |
18m/min |
Reduction ratio |
1:30 |
Working temperature |
-25°C to 70°C |
|
|
|
Model's Outfit
|
Model |
Limit switch |
Driver type |
Speed |
Control box |
L200 |
Magnetic switch |
Gear wheel 24T |
12m/min |
XF24W |
L200B |
Spring switch |
Gear wheel 19T |
10m/min |
L110 |
Spring switch |
Chain wheel 16T |
10m/min |
XF24U |
L110A |
Spring switch |
Gear wheel 19T |
12m/min |
L110B |
Magnetic switch |
Gear wheel 19T |
12m/min |
L110C |
Magnetic switch |
Chain wheel 16T |
10m/min |
K750 |
Magnetic switch |
Gear wheel 16T |
18m/min |
KZX-750 |
|
